RFID readers and GPS detection
One of the key factors in all our projects is to ensure correct distribution of separate collection containers and to correctly connect them to user data to obtain a real and reliable database.
In order to exploit our products at their best, the starting point is to supply containers to users, and hardware and software to the managing authorities, to encourage good practices in citizens at the minimum cost.
Function
The radio frequency identification (RFID) used by our systems is a technology for the remote automatic recognition and management of information. It is based on the storage of data in special passive electronic components (TAGs) activated near fixed and portable devices called readers. Unlike LF (low frequency) technology, it does not require contact for reading. This makes the operator’s work and the service faster and smoother.
The TAG is a passive transponder, without a battery, it is installed during the production of the container for separate collection, it has a unique code and it is then connected with each user during the distribution of the devices. This code may contain information relating to the utility, the user, the municipality, the collected fraction of waste, the volume of containers, etc.
UHF tag readers ensure that the door-to-door system achieves its goal of reducing the amount of generated waste: citizens are encouraged to recycle carefully as their waste tariff will be calculated on the basis of the waste they actually generate. Correct management of user-pay guarantees support for the policy of a constant and responsible increase in separate waste collection.
Features
Devices and reading systems, georeferencing, storage and sending of data relating to the waste collection service:
- allow to read the codes (UHF EPC Gen 2) installed on liners, caddies and wheeled containers
- guarantee the local storage of over 100,000 readings
- have 2G connectivity – Bluetooth 4.1
- have a IP67 protection degree. The International Protection code is a parameter defined by the international IEC standard 60529 (IEC stands for International Electrotechnical Commission), which classifies and evaluates the degree of protection of mechanical casings and electrical enclosures. 67 indicates an enclosure that is totally resistant to the ingress of dust and protected from the ingress of water if immersed up to 1 meter deep for a maximum of 30 minutes.
Control room
The vehicle systems and mobile readers are connected and coordinated by the
data management software or by the cloud application.
Control room supports utilities that (shall) fall within the 3rd and 4th regulatory schemes of the TQRIF (Consolidated text on urban waste management quality), which include technical quality restrictions.
The portal allows to track the provided service, remotely recording in detail the emptyings (where, what, when and outcome) and vehicles collection route.
A clear and detailed reporting allows to analyze data according to graphs, maps and tables.
Available versions
Arco40EVO
Reading system, georeferencing, storage and sending of data relating to the waste collection service. It allows to read codes (UHF EPC Gen 2) installed on bags, domestic and wheeled containers.
The system has been designed to be and easy-to-use tool, facilitating the normal emptying operations.
Arco40EVO is complete from a technological point of view and it strictly respects the current regulations. It complies with the Legislative Decree 20 April 2017 “Rules for the implementation of the PAYT taxation system by the Municipalities” and is ISO/IEC 15408 compliant (Common Criteria Certificate version 3.1).
- Display: 5″
- Membrane keyboard
- Supported inclinometer sensor (not included)
- Supported ultrasonic sensor (not included)
- Supported proximity sensor (not included)
- GPS and GPRS connectivity
ArcoBEAT
Portable device for reading, georeferencing, storage and sending data relating to emptying. The device is provided with a band so that it can be used on the wrist.
- Connectivity: Bluetooth 4.1 LE for data download on Arco40EVO controller
- OLED display: monochrome 128×128
- Membrane keyboard
- High protection ABS case
- User-friendly interface
- Long-life 1800 mAh battery
- GPS tracking
- ARM CPU board
- Removable band
- MicroUSB plug-in charger
Arco20EVO
Devices and reading systems, georeferencing, storage and sending of data relating to the waste collection service. It can be installed on the rear of the vehicles or directly in the cab.
To read the TAGs, the controller works when coupled with the ArcoBEAT portable reader, from which it receives data through the Bluetooth low energy connection. The readings obtained by the ArcoBEAT reader are stored in the local memory of the device and sent to the server through the mobile connection.
- Display: 2.8″ colour
- RFID: connection via Bluetooth to ArcoBEAT devices (up to three for each unit) for reading TG UHF EPC Gen2
Control room
The data management software consists of a web portal, accessible via username and password, which monitors position of the vehicles, data transmitted by the Arco40 EVO (and previous versions) system and by ArcoBEAT mobile readers and data for final report processing.
The management software allows to export sectoral reports, obtained from the data provided by the reading system. Standard reports includes various reports relating to vehicle activities (routes, stops, breaks), activities at points of interest, as well as the monthly activity and emptying report.
The system allows to detect the position of the vehicle, the different service/transfer/stop times (stop, pause), the collection/emptying operations, the information detected by on-board sensors – if installed and active – and the mileage.
The GPS, configured to read vehicles movements and stops coordinates, accurately and efficiently tracks each route.
This user-friendly system is based on the cartography provided by Google Maps, and it supports all the functions provided by Google such as satellite view and street view.